Philips MCM204, User Manual

Page: 16 / 25

16
English
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
2
Press
SOURCE
on the set repeatedly or press
TUNER
on the remote repeatedly until the
desired waveband (FM or MW) is displayed.
3
Press down on
TUNING
4 ¢
and release
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNING
4
¢
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press
ALBUM/PRESET
4 3
to select the
preset number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROG
for more than 2 seconds to
activate programming.
➜ AUTO
is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press
PROG
to activate programming.
➜
PROG
flashes in the display.
3
Press
ALBUM/PRESET
4 3
to allocate a
number from 1 to 20 to this station.
4
Press
PROG
again to confirm the setting.
➜
PROG
disappears, the preset number and the
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
ALBUM/PRESET
4 3
until the desired
preset station is displayed.
PG 001-024_MCM204_12-Eng 6/17/08, 11:26 16