12
English
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Plug and Play
(for tuner installlation)
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL
-
PRESS PLAY
" is displayed.
2
Press
ÉÅ
on the system to star t installation.
➜
"
PLUG AND PLAY
" .... "
INSTALL
" is
displayed, followed by "TUNER" and "AUTO".
➜
PROG
starts flashing.
➜
The system will automatically store the radio
stations with sufficient signal strength, starting
from FM, and followed by MW band.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby mode, press and hold
ÉÅ
on the
system until "
AUTO INSTALL
-
PRESS PLAY
"
is displayed.
2
Press
ÉÅ
again to start installation.
➜
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●
Press
9
on the system.
➜
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
Switching the system on
●
Press
STANDBY ON
ECO POWER
or
SOURCE
(or
2
on the remote control).
➜
The system will switch to the last selected
source.
●
Press
CD
,
TUNER
or
TAPE
on the remote
control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press
STANDBY ON
ECO POWER
on the
system (or
2
on the remote control).
●
If in tape mode or recording mode, press
STOP•OPEN
Ç
0
first.
➜
The volume level (up to a maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
To switch the system to Eco-power
standby mode
●
Press and hold
STANDBY ON
ECO POWER
(or
y
on the remote control) for more than 2
seconds.
➜
The display will go blank.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
M I C R O S Y S T E M M C M 2 0 4
ALBUM/
PG 001-024_MCM204_12-Eng
6/17/08, 11:26
12
Summary of Contents for MCM204
Page 3: ...3 ...
