38
English
Clock/Timer
Clock setting
See "Preparations-Step 2: Setting the clock".
Timer setting
●
The system can be used as an alarm clock,
whereby the selected source (DISC, TUNER or
USB) starts playback at a preset time.
Make
sure the clock is set before using the
timer.
1
In standby mode, press and hold
SLEEP/
TIMER
on the remote control until
appears.
➜
SELECT SOURCE
displays.
2
Press
SOURCE
on the set repeatedly to select
the source (or press
DISC, TUNER
or
USB
on the remote control).
3
Press
SLEEP/TIMER
to confirm.
➜
The hours digits start flashing.
4
Turn the
VOLUME -/+
control on the front
panel or press
VOL +/-
on the remote to set
the hours and press
SLEEP/TIMER
to
confirm.
➜
The minute digits flash on the display panel.
5
Turn the
VOLUME -/+
control on the front
panel or press
VOL +/-
on the remote to set
the minutes and press
SLEEP/TIMER
to
confirm.
Activating and deactivating
TIMER
●
In standby mode, press
SLEEP/TIMER
on the
remote once or more to activate or deactivate
the timer.
➜
Display shows
if activated, and disappears
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press
SLEEP/TIMER
on the
remote control repeatedly to select a preset
time.
➜
The selections are as follows (time in
minutes):
SLEEP OFF
™
SLEEP 10
™
SLEEP 20
™
SLEEP 30
™
SLEEP 40
™
SLEEP 50
™
SLEEP 60
™
SLEEP 70
™
SLEEP 80
™
SLEEP 90
™
SLEEP OFF
2
When you reach the desired length of time, stop
pressing the
SLEEP/TIMER
button.
To deactivate the sleep timer
●
Press
SLEEP/TIMER
repeatedly until "
SLEEP
OFF
" is displayed, or press
ECO POWER/
STANDBY ON
y
(or
y
on the remote)
.
USB/
pg001-pg043_MCD297-Eng
2008.6.24, 10:47 AM
38
