23
Deleting Heard Messages
Deleting New Messages
1
Press
b
.
2
Use
/
to select
MESSAGES
.
3
Confirm with
_
.
4
Use
/
to select
MESSAGE: DELETE
.
5
Confirm with
_
. The heard messages are deleted.
On the cordless telephone
Deleting single message
During the playback, press
0
to delete the current message.
Deleting messages already played
Deleting New Messages
1
Press
/
, and using
/
select
VOICE MAIL
.
2
Confirm using
_
.
3
Using
/
select
MESSAGES
.
4
Confirm with
_
.
5
Using
/
select
DELETE OLD
.
6
Confirm with
_
.
7
Confirm the deletion with
ô
Yes
. Using
õ
No
you
can cancel the function.
Setting up forwarding and remote
access
Available only on the device
Entering the Access Code
Access Code
In order that you can receive forwarded messages as well as
check or control the answering machine from other tele-
phones, you must enter an access code.
Access Code <> VIP Code
1
Press
b
.
2
Use
/
to select
ACCESS CODE
.
3
Confirm with
_
.
4
Enter a four-digit code.
5
Confirm with
_
.
Forwarding Messages
Forwarding Messages
The machine forwards messages to a specified telephone
number. Once the configured number of messages is
reached, the machine calls the number. If the call is an-
swered, a greeting text is played. Then the person on the line
must enter the access code. If no code is entered or an incor-
rect code is entered three times, the machine hangs up.
1
Press
b
.
2
Use
/
to select
FORWARDING
.
3
Confirm with
_
.
4
Use
/
to select whether you would like to switch for-
warding on or off.
5
Confirm with
_
.
6
Enter the number to which the received messages
should be forwarded.
7
Confirm with
_
.
8
Use
/
to select how many messages should be collect-
ed and forwarded together.
9
Confirm with
_
.
10
Recording a new greeting text:
Press
_
to
record the greeting text. Wait until hearing the confir-
mation tone before starting the text.
11
Press
_
to end the recording. The recording is played
back.
Using the Remote Control
Remote Control
With a telephone call, you can listen to and delete messag-
es, record a new outgoing message or switch the answering
machine on or off.
Tone Dialling
1
Call your telephone number.
2
Wait until the answering machine switches on and
plays back the outgoing message.
3
Enter the access code.
4
The machine interrupts the outgoing message and plays
new messages. If no new messages have been received,
you will hear two confirmation tones.
5
The functions below are available via the number but-
tons.
6
Hang up to end the remote control session.
Messages not yet heard must be heard first before de-
leting them.
You can also load the function by pressing
_
,
72
and
_
.
You can also delete the already heard messages by
pressing
V
and
_
in the starting mode.
Messages not yet heard must be heard first before de-
leting them.
These functions are available only on the device.
The access code may not be identical to the VIP
code.
You can also load the function by pressing
_
,
79
and
_
.
You can also load the function by pressing
_
,
77
and
_
.
When you record a message, you are asked, if you
would like to use the old message or would like to
record a new one. Confirm using
_
.
The telephone on this connection must be set to tone
dialling. Press a button within 50 seconds, otherwise
the connection is cut-off (country and network de-
pendent).
If you select the
5/2
option for the number of
rings of the answering machine, the answering
machine switches on after two rings, when you
have received new messages. If there are no new
messages, the device rings five times. If the device
does not pick up after two rings, you have no new
messages. You can terminate the remote access
without incurring any telephone costs.
