43
English
3139 115 22741
Troubleshooting
The DVD player does not start playback.
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
Radio reception is poor.
The remote control does not function
properly.
The timer is not working.
The display panel is dark.
Low hum or buzz sound.
The disc tray cannot open and “TRAY
LOCKED” is displayed.
Problem
Solution
–
Insert a readable disc with the playback side
facing down.
–
Check the disc type, colour system and region
code.
–
Check for any scratches or smudges on the disc.
–
Press SYSTEM SETUP
to turn off the setup menu
screen.
–
Change the rating level.
–
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
–
The features may not be available on the DVD.
–
Changing the language for the sound or subtitle is
prohibited on the DVD.
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
–
Increase the distance between the system and
your TV or VCR.
–
Tune in to the correct frequency.
–
Place the antenna farther away from any
equipment that may be causing the noise.
–
Select the source (DISC or TUNER, for example)
before pressing the function button (
ÉÅ
,
S
,
T
).
–
Reduce the distance between the remote control
and the system.
–
Replace the batteries with new ones.
–
Point the remote control directly toward the IR
sensor.
–
Check that the batteries are loaded correctly.
–
Set the clock correctly.
–
Press and hold CLOCK/TIMER to switch on the
timer.
–
Press DIM again.
–
Place the DVD system as far away as possible
from electrical devices that may be causing
interference.
–
Hold down PROG button on the system until
“TRAY UNLOCK?” appears on the display, then
hold down PLAY/PAUSE button on the system.
001-045-LX71-22-Eng
8/07/2003, 11:27 AM
43
