8.
Return to the ADVANCED SETUP menu. Select the
SEQUENCES
option. Camera sequencing on Monitor A
and Monitor B is a function available to all multiplexer models.
•
Quad sequencing is a function available on Monitor A.There are four Quad screens available and each Quad
page can be customized to suit each application.
•
Camera sequencing is programmable for cameo 1 of the 5+1 multiscreen display mode of the 6-channel models
LTC 2622/90
(as shown below).
9.
Return to the ADVANCED SETUP menu. Select the
CONFIGURE SETUPS
option.The LTC 2600 Series
multiplexer has the capability to provide up to six individually configured setups that are retained in the multiplexer
memory. By using these setups, the multiplexer can be programmed to automatically change its mode of operation
based on a timer setting. This allows different configurations to be used (e.g. day, night, weekend and holidays).The
Record option allows recording to be accomplished during a timed event.
The following options can be programmed for each setup:
•
Load Setup
: The setup can be configured and then loaded into memory, making it the current operating
configuration.
•
Copy Setup
: A setup can be copied and then saved as another setup.
•
Setup Title
: Each setup can have an individual title of 12 characters. (This title will displayed on line two of
the multiplexer menus).
•
Time Events
: The Time Event function allows each of the six setups to be programmed for several
parameters including start time, duration, and frequency (daily schedule) of recording. A sample menu is shown
below. Note that these parameters must be set for each setup (1-6).
NOTE:
RUN ONE TIME allows for individual events to be programmed and then run only one time. After
the event, the multiplexer reverts to its “normal” programmed setup(s).
25
LTC 2600 Series
Section 4 Programming - Advanced Setup
CONFIGURE SETUP
>LOAD SETUP
COPY SETUP
SETUP TITLE
TIME EVENTS
Choose:SELECT
More v
Exit:ZOOM
ADVANCED SETUP 3.00
SETUP 1
ACTION SETUP
ALARM SETUP
CAMERA TITLES
SEQUENCES
>CONFIGURE SETUP
Choose:SELECT
^ More v
Exit:ZOOM
Sequencing
TIME EVENTS
>SETUP 1
SETUP 2
SETUP 3
SETUP 4
SETUP 5
SETUP 6
Choose:SELECT
More ^
Exit:ZOOM
CONFIGURE SETUP
LOAD SETUP 1
COPY SETUP
SETUP TITLE
>TIME EVENTS
Choose:SELECT
More v
Exit:ZOOM
TIME EVENTS
SETUP 1
>SETUP ON/OFF
OFF
START TIME
00:00
DAYS
SMTWTFS
RUN ONE TIME
ON
RECORD
OFF
Choose:SELECT
More ^
Edit:<>
Exit:ZOOM
