The parameters in the
ACTION SETUP
menu are defined and programmed as follows:
ACTION DWELL
:The action will be held for monitor display (full video on monitor B, when applicable) and
recording for the programmed duration (3 to 60 seconds). Press the <left / >right keys to increment/decrement.
NOTE
: For
6-channel models only
(
LTC 2622/90
).
ACTION LIST
: Selects cameras to have motion detection. Entering the ACTION LIST menu enables this list to
be customized to a specific configuration.
ACTION DISPLAY
: Action display is available for MON A and MON B. Action display MON A setting will allow
customized action viewing. Multiple actions will override programmed setting(s) and display a 5+1 multiscreen with
ACTION flashing in the text display area. MON B will show full screen on action and at 2 second intervals when
multiple actions are sensed.
ACTION ZONES
: The screen is divided into a 14 X 16 grid (224 zones). Enabling or Disabling zones will allow
the installer to specify which areas of the scene will detect action. For example, for an outdoor application, some
of the scene includes a view of the sky. In this case, the grid areas covering the sky can be disabled.
•
Once in the ACTION ZONE setup, select the camera requiring setup by depressing the corresponding camera
number.
•
To
enable zones
, select the MENU
key, and ensure ZONE (EDIT:MENU) = ENABLE (X) is displayed. Move
the cursor using the up, down, left, and/or right arrow keys to enable zones. Enabled zones will display an X.
•
To
disable zones
, select the MENU
key, and ensure ZONE (EDIT:MENU) = DISABLE (O) is displayed.
Move the cursor using the up, down, left, and/or right arrow keys to disable zones. Disabled zones will be
blank.
•
To select the
Default Enabled Zones
, select the FREEZE
key (12 X 14 grid, 168 zones).
•
To exit the Action Zone setup, select the ZOOM
key.
LTC 2600 Series
Section 4 Programming - Advanced Setup
22
x x x x x x x x x x x x x x
Camera 1 x x x x x x x x x x
x x x x x x x x x x x x x x
x x x x x x x x x x x x x x
x x x x x x x x x x x x x x
x x
Zone [Edit: MENU] =ENABLE (x) Move Cursor:^v
Camera: 1 to 16 Freeze: DEFAULT
Exit: ZOOM
ACTION SETUP
SETUP 1
ACTION DWELL
08 sec
ACTION LIST
>ACTION ZONES
WALKTHROUGH
DIRECTION ZONE
Choose:SELECT
More v
Edit:<>
Exit:ZOOM
