User manual
Slide the HOLD switch to the Off position to enable the buttons
on the Voice Tracer.
Record
Press the REPEAT/FOLDER button to select the desired folder.
The Voice Tracer will move to the next folder each time you press
the button.
Set the desired voice activation function and quality (Super HQ,
HQ, SP, LP, SLP) before you start recording (see the Menu chapter
for more details).
Make a test recording to make sure that the Voice Tracer settings
are correct.
Press and hold the PLAY/PAUSE button during recording for a few
moments to display the remaining recording capacity.
The maximum number of files in each folder is 99, for a total
capacity of 396 files (99 files x 4 folders).
If the recording time exceeds the available capacity or
the number of files reaches 396, “FULL” will be displayed
and recording cannot be continued
1
2
. If this happens,
delete a few recordings or move them to an external
device (audio or computer).
Do not remove the batteries during recording. This may
1�
•
•
•
•
•
•
•
cause the Voice Tracer to malfunction.
If recording for a prolonged period of time, replace the
batteries before beginning.
When the Voice Tracer is in voice activation mode
3
, recording
will stop automatically when no sound is detected. Disable the
function when recording important conversations.
Press the REC button while playing back an MP3 or WMA file in
the M (Music) folder to enable the equalizer.
3.1 Record With the Built-in Microphone
Press and hold the REC/PAUSE button for a moment to switch
the Voice Tracer on and start recording
1
2
. The red LED will
light.
Point the Voice Tracer’s built-in microphone towards the sound
source. Press and hold the PLAY/PAUSE button during recording
to display the remaining recording capacity.
Press the REC/PAUSE button to pause the recording. The
red LED will blink, and “Pause” will flash on the display.
Press the REC/PAUSE button again to resume
recording. The red LED will light again.
Press the NEXT button to create a new file during
recording (file separation function).
The total time of the recording is displayed when you
stop recording by pressing the STOP/MENU button
3
.
•
•
•
1�
2�
3�
4�
5�
6�
1
2
3
3
1
2
dvt7780_7790_7890_ifu_en-de-fr-e8 8
04/07/2007 10:53:38
