Philips LASERMFD LFF 6020 User Manual Download Page 25

Page: 25 / 56

LFF6020

- 21 -

3 - Co

Top and bottom printing margins setup

If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.

856 - ADVANCED FCT/SCAN. & PRINT/TOP

PRINT.

Press , enter

856

using the keypad.

Setup the top / bottom margins offsets (by 0.5 mm
steps) with the buttons and .

Confirm by pressing the

button.

Quit this menu by pressing the

button.

Format paper setup

This menu allows you to define the default paper format
of the manual tray and the main tray. You can also setup
the default scanning width.

857 - ADVANCED FCT/SCAN. & PRINT/

PAPER FORMAT

Press , enter

857

using the keypad.

Select the paper tray for which you want to define
a default paper format with the buttons and .

Confirm by pressing the

button.

Choose the paper format with the buttons

according to the following table:

Confirm by pressing the

button.

Quit this menu by pressing the

button.

Paper tray

Available paper format

MAN. TRAY

A5, Statement, A4, Legal and Letter

AUTO. TRAY

A5, Statement, A4, Legal and Letter

SCANNER

LTR/LGL and A4

Summary of Contents for LASERMFD LFF 6020

























































Search results

Summary of Contents for LASERMFD LFF 6020

Reviews:

Related manuals for LASERMFD LFF 6020

Brands by name

Popular brands

Philips LASERMFD LFF 6020, User Manual

Search results

Summary of Contents for LASERMFD LFF 6020

Reviews:

Related manuals for LASERMFD LFF 6020

Brands by name

Popular brands