Philips hudson iv 170x5, Service Manual, Page: 75 / 93

Go to cover page
170X5 LC D
75
Update the firmware
1 . D ouble clic k the Gprobe 4 icon on the des k top ,then
appears as shown in Fig. 5
2. Press the options then choose configure Pin as shown in Fig. 5
3. From the menu that appears, choose the number 17 in "output
pin" and the number 1 2 in " input pin" as shown in Fig.6
window
Fig. 5
Fig.6
4 . Press the options then choose connection setup as shown in Fig. 7
5 . From the menu that appears , choose the DDC 2Bi3 in "protocol"
and the L P T ( 0x 3 7 8) in "port" as shown in Fig.8
Fig. 7
6. clic k the "commands" and select the "Batch", as shown in Fig.9, Fig. 10
Fig.8
Fig. 10
7 . C lic k the button as shown in Fig. 10 to browse the Iicisp.t x t file in
the folder that you created.
Note:
you should pay attention to the described path in the
Iicisp.txt file. It must be the same as the file's path that
created. you
Fig.9
ISP CABLE for CPU