3 - 2
3 - 2
Dismantling of the Main Board
1) Loosen 3 screws “E” on the top of Main Board as shown in fi gure 8.
2) Loosen 8 screws “F” at the back panel as shown in fi gure 9.
3) VFC120330-060R replace with
VFC120230-250R as shown in fi gure 10 &11.
Figure 9
Figure 8
Dismantling of the Power Board
1) Loosen 5 screws “G” on the top of Power Board as shown in fi gure 12.
E
F
WARNING: This cable is to be use for servicing only. Not to be use in the set assessmbly after service as it may cause safety issue. To
be remove and replace with original cable after servicing.
Note: When you repaire Main Board, this VFC cable
must be replaced by below VFC cable as shown in figure 11
Figure 10
VFC120230-250R
Figure 11
G
Figure 12
Dismantling of the VFD Board
1) Loosen 2 screws “H” at the bracket as shown in fi gure 13.
H
Figure 13
Dismantling of the KEY Board
1) Loosen 2 screws “J” at the bracket as shown in fi gure 14.
J
Figure 14
