background image

22

EN

       Subwoofer

• 

    Output power: 150 W RMS (30% THD) 

• 

  Impedance: 8 ohm

• 

  Speaker drivers: 165 mm (6.5") woofer

• 

  Dimensions (WxHxD): 195 x 265 x 265 mm

• 

  Weight: 3.20 kg

       Speakers

• 

    Output power: 2 x 75 W RMS (30% THD)

• 

  Speaker impedance: 4 ohm

• 

  Speaker drivers: 1 x 63.5 mm (2.5") woofer

• 

  Dimensions (WxHxD): 84.5 x 159 x 80 mm

• 

  Weight: 0.35 kg/each

       Remote control batteries

• 

    2 x AAA-R03-1.5 V 

       Laser

• 

    Laser Type (Diode): InGaN/AlGaN (BD), 

AlGaInP (DVD/CD)

• 

  Wave length: 405 +7 nm/-7 nm (BD), 655 

+10 nm/-10 nm (DVD), 790 +10 nm/-20 nm 

(CD)

• 

  Output power (Max. ratings): 20 mW (BD), 

6 mW (DVD), 7 mW (CD)

         8 Troubleshooting

Warning

 

Risk of electric shock. Never remove the casing 

of the product.

 To keep the warranty valid, never try to repair the 

product yourself. 

  If you have problems using this product, check 

the following points before you request service. If 

you are still having problems, get support at www.

philips.com/support. 

    Main unit

   The buttons on the home theatre do not work.

• 

   Disconnect the home theatre from the power 

supply for a few minutes, then reconnect.

       Picture

   No picture.

• 

   Make sure that the TV is switched to the 

correct source for the home theatre.

     No picture on a TV connected through HDMI.

• 

   Make sure that the HDMI cable is not faulty. If 

it is faulty, replace it with a new cable.

• 

  Press     ( 

Home

 ) and then  

731

  on the remote 

control to restore the default picture resolution.

• 

   Change the HDMI video setting, or wait for 

10 seconds for auto recovery   (see 'Picture 

and video settings' on page   16  ) .

     Disc does not play high-de

fi

 nition video.

• 

   Make sure that the disc contains high-

de

fi

 nition video.

• 

  Make sure that the TV supports high-

de

fi

 nition video. 

• 

  Use an HDMI cable to connect to the TV.

       Sound

   No sound from home theatre speakers.

• 

   Connect the audio cable from your home 

theatre to your TV or other devices. You do 

not need a separate audio connection when 

the home theatre and TV are connected 

through an  

HDMI ARC

  connection.

• 

   Set up the audio for the connected device   

(see 'Set up the audio' on page   9  ) .

Summary of Contents for HTS3251/12

































Reviews: