8239 300 38592
Optional Connections - Playback
OR
Connecting to a DVD/SACD
player
A
B
C
OR
DVD/SACD
player
You only need to make one connection
to your DVD/SACD player from the
following options, depending on the
capabilities of your DVD/SACD player.
Option 1: Using 6 Channel In jacks
●
If your DVD/SACD player has a built-in
multichannel decoder (e.g. Dolby Digital,
DTS) and has 6-channel (multichannel)
output jacks, you may use the audio
cables (not supplied) to connect the AV
receiver’s
6 CHANNEL IN
jacks to the
corresponding output jacks on the
DVD/SACD player (see fig
A
).
Before starting operation,
1
Start playing back the connected source
as usual.
2
Press
DISC
on the remote to select
“
DISC 6CH
” in order to activate the
input source, then press
VOL
+-
to
adjust the volume level.
Helpful Hints:
– The audio signals produced by 6 channel is
multichannel surround. Therefore, switching to
Stereo mode has no effect.
– Making recording from this input is not
possible.
Option 2: Using Coaxial In jack
●
Or, use an coaxial cable to connect the
AV receiver’s
COAXIAL IN
jack to the
COAXIAL output jack on the
DVD/SACD player (see fig
B
).
Before starting operation,
1
Start
playing back
the connected source
as usual.
2
Press
DISC
on the remote to select
“
DISC COAX
” in order to activate the
input source, then press
VOL
+-
to
adjust the volume level.
Option 3: Using Optical In jack
●
Or, use an optical fiber-optic cable (not
supplied) to connect the AV receiver’s
OPTICAL IN
jack to the OPTICAL
output jack on the DVD/SACD player
(see fig
C
).
Before starting operation,
1
Star
t playing back t
he connected source
as usual.
2
Press
DISC
on the remote to select
“
DISC OPTI
” in order to activate the
input source, then press
VOL
+-
to
adjust the volume level.
A
M
English
13
