background image

8239 300 38591

Connections

1

1

3

3

2

4

2

Step 2: Placing the speakers

and subwoofer

Front Speaker

(Left)

Front Speaker

(Right)

AV Receiver

Subwoofer

Rear speaker

(Right)

Rear speaker

(Left)

Center

speaker

You can choose to hang the speakers on
the wall.  Mount a screw (not supplied)  
on the wall where the speaker is to be 
hung and hook the speaker securely onto
 
 

Step 1: Set up the speakers

For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.

1

Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.

2

 Place th

e center speaker above the TV or

the AV receiver so that the center

channel’s sound is localised.

3

Place the rear speakers at normal
listening ear level facing each other or
mounted on the wall.

4

Place the subwoofer on the floor near
the TV.

Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– Allow adequate ventilation around the AV
receiver.

the mounted screw.

CAUTION!
You should get a qualified person to
attach the brackets to the wall.  DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.

Helpful Hints:
– The rear speakers are labelled as REAR L
(left) or REAR R (right).
– The front speakers are labelled as
FRONT L (left) or FRONT R (right).

English

9

Summary of Contents for HTR5000



























Reviews: