background image

16

EN

8 Notice

This section contains the legal and trademark 

notices.

Notice of compliance

This set complies with the FCC rules, Part 15 

and with 21 CFR 1040.10. Operation is subject 

to the following two conditions:

This device may not cause harmful 

interference, and

This device must accept any interference 

received, including interference that may 

cause undesired operation.

FCC rules

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment generates, 

uses and can radiate radio frequency energy 

and, if not installed and used in accordance 

with the instruction manual, may cause harmful 

interference to radio communications.

However, there is no guarantee that 

interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, 

which can be determined by turning the 

equipment off and on, the user is encouraged 

to try to correct the interference by one or 

more of the following measures:

• 

Relocate the receiving antenna.

• 

Increase the separation between 

equipment and receiver.

• 

Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

• 

Consult the dealer or an experienced 

radio/TV technician for help.

FCC Radiation Exposure Statement:

This 

equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 

environment. This equipment should be installed 

and operated with a minimum distance of 

20cm between the radiator and your body. 

This transmitter must not be co-located or 

operated in conjunction with any other antenna 

or transmitter.

Warning:

 Changes or modifications made to 

this equipment not expressly approved by 

Philips may void the FCC authorization to 

operate this equipment.

Model number: PHILIPS HTL5110/F7

Trade Name: Philips

Responsible Party:P&F USA, Inc. PO Box 2248 

Alpharetta, GA 30023-2248; 1-866-310-0744

Canada: 

This device complies with Industry Canada 

licence-exempt RSS standard(s). Operation is 

subject to the following Two conditions: (1) this 

device may not cause harmful interference, and 

(2) this device must accept any interference 

received, including interference that may cause 

undesired operation.

This Class B digital apparatus complies with 

Canadian ICES-003. 

Trademarks

 

Manufactured under license from Dolby 

Laboratories. Dolby and the double-D symbol 

are trademarks of Dolby Laboratories.

  

The Bluetooth® word mark and logos are 

registered trademarks owned by Bluetooth 

SIG, Inc. and any use of such marks by Philips is 

under license. 

Summary of Contents for HTL5110/F7












Reviews: