background image

12

13

EN

EN

5  Wall mount

Note

 

Koninklijke Philips Electronics N.V. bears no 

responsibility for improper wall mounting that results 

in accident, injury or damage. If you have any query, 

contact Philips Consumer Care in your country.

 

Before wall mounting, make sure the wall can support 

the weight of your SoundBar.

 

Before wall mount, you need not remove the three 

rubber feet at the bottom of the soundbar, otherwise 

the rubber feet cannot be fixed back.

Screw length/diameter

Depending on the type of wall mounting your 

SoundBar, make sure that you use screws of a 

suitable length and diameter.

  

For information about how to wall mount your 

SoundBar, see the quick start guide.

> 25mm

3.5-4mm

4mm

Select and play audio files or music on 

your Bluetooth device.

• 

During play, if a call is coming, music 

play is paused. Play resumes when the 

call ends.

• 

If your Bluetooth device supports 

AVRCP profile, on the remote control 

you can press    /   to skip to a track, 

or press 

 to pause/resume play.

To exit Bluetooth, select other source.

• 

When your switch back to Bluetooth 

mode, Bluetooth connection remains 

active.

Note

 

The music streaming may be interrupted by obstacles 

between the device and SoundBar, such as wall, metallic 

casing that covers the device, or other devices nearby 

that operate in the same frequency.

 

If you want to connect your SoundBar with another 

Bluetooth device, press and hold 

 Bluetooth

 on the 

remote control to disconnect the currently connected 

Bluetooth device.

 

Philips does not guarantee 100% compatibility with all 

Bluetooth devices.

Auto standby

When playing media from a connected device, 

the SoundBar automatically switches to standby 

if:

• 

no button is pressed for 29 minutes, and

• 

no audio/video play from a connected 

device.

Apply factory settings

You can reset your SoundBar to the default 

settings programmed at the factory.

In AUX mode, within three seconds, press 

VOL-

BASS-

,and 

Treble- 

.

 

»

When the factory settings restore is 

complete, the SoundBar automatically 

switches off and restarts.

Summary of Contents for HTL5110/F7












Reviews: