8
9
EN
EN
Connect
Connect your subwoofer to your SoundBar as
described in the quick start guide.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your Soundbar speakers.
Use the best quality connection available on
your TV, Soundbar, and other devices.
Note
•
When your Soundbar and TV are connected through
HDMI ARC, an audio connection is not required.
Option 1: Connect audio through a
digital optical cable
Best quality audio
1
Using an optical cable, connect the
OPTICAL
connector on your SoundBar to
the
OPTICAL OUT
connector on the TV
or other device.
•
The digital optical connector might be
labeled
SPDIF
or
SPDIF OUT
.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
TV
1
Using a coaxial cable, connect the
COAXIAL
connector on your SoundBar
to the
COAXIAL/DIGITAL OUT
connector on the TV or other device.
•
The digital coaxial connector might be
labeled
DIGITAL AUDIO OUT
.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the
AUX
connectors on your SoundBar to the
AUDIO OUT
connectors on the TV or
other device.
DVD
3 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Subwoofer
Follow the steps below to position and connect
your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from either to the left or right of
your SoundBar, and ten centimeter away from
the wall.
For best results, place your subwoofer as shown
below.
Pair up with the subwoofer
The wireless subwoofer automatically pairs
up with the SoundBar for wireless connection
when you turn on the SoundBar and the
subwoofer.
If no audio from the subwoofer can be heard,
manually pair up the subwoofer.
Pair up with the subwoofer
1
Turn on the SoundBar and the subwoofer.
»
If the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the
CONNECT
button on the
subwoofer to enter the pairing mode.
»
The indicator on the subwoofer blinks
white quickly.
3
On the remote control, press
AUX
, and
then press
TREBLE -
,
BASS +
and
+
(
Volume
) within three seconds.
»
If the pairing succeeds, the indicator on
the subwoofer lights up white.
»
If the pairing fails, the indicator on the
subwoofer blinks white slowly.
4
If the pairing fails, repeat the steps above.
