14
15
EN
EN
6 Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
•
Before wall mount, you need not remove the four
rubber feet at the bottom of the SoundBar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
See the illustration in the quick start guide on
how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
> 25mm
3.5-4mm
4mm
5 Update software
To get the best features and support, update
your product with the latest software.
What you need
• Connect this product to your TV through
HDMI.
Check software version
• In any source mode, press
TREBLE -
,
BASS
-
and
-
(
Volume
) on the remote control.
Update software via USB
1
Check the latest software version on www.
philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a
Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL3110.BIN".
b
Put the "HTL3110.BIN" file in the
root directory.
3
Connect the USB storage device to the
(
USB
) connector on this product.
4
Switch this product to the HDMI ARC
source, and switch your TV to the HDMI
source.
5
On the remote control, within 6 seconds
press twice, and
VOL +
once, then hold
down
SURROUND ON
.
»
If an upgrade media is detected, on the
TV screen you are prompted to start
the update.
»
If an upgrade media is not detected,
an error message is displayed on the
TV screen. Make sure that the latest
software of this product is put in the
USB storage device.
6
Press to start the update.
7
Wait until the update is completed.
»
If the update is complete, this product
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
