Philips HR7639, Recipes & Directions For Use

Page: 14 / 110

14
These parts have been tested for dishwasher
resistance according to DIN EN 12875.
The cover with insert storage space and the
blender jar are not dishwasher proof!
Clean the blade, the blade unit of the blender and
the inserts very carefully. Their cutting edges are
very sharp!
Make sure that the cutting edges of the blade, the
blade unit of the blender and the inserts do not
come into contact with hard objects. This could
cause them to become blunt.
Certain ingredients may cause discolourations on
the surface of the accessories. This does not have
a negative effect on the accessories. The
discolourations usually disappear after some time.
Cleaning of filter
◗
Hold the filter over a waste bin immediately
after use and gently shake out its contents
and rinse it under the tap.
Cleaning of mill
◗
Unplug the appliance.
◗
Detach the mill from the motor unit.
◗
Clean the beaker and the blade unit under a
running tap with lukewarm water and some
washing-up liquid.
◗
Be careful with the sharp edges of the blade
unit!
◗
After washing up the parts, rinse them with
clean water and dry them thoroughly.
Blender quick-cleaning operation
C
1 Pour lukewarm water (not more than 0.5
litres) and some washing-up liquid into the
blender jar.
2 Assemble the lid and the stopper.
C
3 Let the appliance run for a few moments
by pressing the Pulse button. (the
appliance stops running when you release
the button).
4 Detach the blender jar and rinse it with
clean water.
Storage
MicroStore
C
◗
Put the accessories (emulsifying disc, blade,
kneading accessory, insert holder) on the tool
holder and store them in the bowl. Always
end up with the insert holder.
C
◗
Two inserts can be stored in the storage
space in the cover that covers the lid of the
bowl, as indicated on the inside of the cover.
The inserts have to be slid into the cover, not
pressed.