Philips HR2020 CB, Manual

Page: 7 / 68

- Always make sure the lid is properly assembled on the jar and the measuring cup is inserted
properly in the lid before you switch on the appliance.
- Never forget to place the sealing ring on the blade unit before you connect the blade unit to
the blender jar, otherwise leakage will occur.
- Do not let the appliance run for more than 3 minutes at a time. Let itcool down to room
temperature between processing cycles.
- Always let the appliance cool down to room temperature between processing cycles.
Mill
Warning
- Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice
cubes.
- Do not touch the cutting edges of the mill blade unit when you clean it. They are very sharp and
you could easily cut your fingers on them.
Caution
- Never use the mill for more than 30 seconds without interruption. Let the mill cool down to
room temperature between processing cycles.
- Never forget to place the sealing ring in the blade unit before you assemble the mill jar,
otherwise leakage occurs.
- Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender instead.
- Do not use the mill to process liquids such as fruit juice.
Filter (HR2027 only)
Caution
- Never use the filter to process ingredients hotter than 80°C.
- Never overload the filter. Do not put more than 70g dried soy beans or 150g fruit in the filter
at the same time.
- Always make sure the lid is assembled properly and the measuring cup is inserted properly in
the lid before you switch on the appliance.
- Cut fruit into smaller pieces before you put it in the filter.
- Soak dried ingredients, such as soy beans, before you put them in the filter.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Built-in safety lock
This feature ensures that you can only switch on the appliance if you have properly assembled the
blender jar or mill beaker on the motor unit. If the blender jar or mill beaker is correctly assembled,
the built-in safety lock will be unlocked.
Circuit breaker safety system
This appliance is equipped with a circuit breaker safety system. If the motor becomes too hot, the
appliance switches off automatically.
If this is the case, follow the steps below:
1 Unplug the appliance and let it cool down for a few minutes.
EnglisH
7