Philips HQ7360, User Manual

Page: 11 / 184

6 Remove the back panel of the sealed power
unit by means of a screwdriver.
7 Remove the battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after
the battery has been removed.
guarantee & service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com
or contact the Philips Consumer
Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there
is no Consumer Care Centre in your country, go to
your local Philips dealer.
guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.
troubleshooting
1 Reduced shaving performance.
Cause 1: the shaving heads are dirty.The shaver has
not been rinsed long enough or the water used was
not hot enough.
,
Clean the shaver thoroughly before you continue
shaving. See chapter ‘Cleaning and maintenance’.
Cause 2: long hairs are obstructing the shaving heads.
,
Clean the cutters and guards with the brush
supplied. See chapter ‘Cleaning and maintenance’,
section ‘Every six months: shaving heads’.
Cause 3: the shaving heads are damaged or worn.
EnglisH
13