Philips HP4669/05, User Manual

Page: 7 / 124

Keep this appliance away from water. Do not use it near or over
water contained in baths, washbasins, sinks etc. When you use the
appliance in a bathroom, unplug it after use. The proximity of water
presents a risk, even when the appliance is switched off.
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
Keep the appliance out of the reach of children.
The straightening plates and the plastic parts near the plates reach a
high temperature quickly. Prevent the hot surfaces of the appliance
from coming into contact with your skin.
Only use the appliance on dry or damp hair.
Do not leave the plates in your hair for more than a few seconds at a
time as this may cause damage to your hair.
Keep the appliance away from non-heat-resistant surfaces and never
cover the appliance with anything (e.g. towel or clothing) when it is
hot.
For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
Always unplug the appliance after use.
Do not wind the mains cord round the appliance.
Wait until the appliance has cooled down before you store it.
Keep the straightening plates clean and free of dust, dirt and styling
products such as mousse, spray and gel. Dust, dirt and styling
products may cause damage to the tourmaline ceramic-coated
straightening plates.
Always return the appliance to a service centre authorised by Philips
for examination or repair. Repair by unqualified people could cause
an extremely hazardous situation for the user.
The plates have a tourmaline ceramic coating. This coating slowly
wears away over time. This does not affect the performance of the
appliance.
If you use the appliance on colour-treated hair, the straightening plates
may stain.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
EnglisH
7