Philips HP4666, Manual

Page: 9 / 128

,
The default temperature setting of 120 appears on the display. As
soon as the appliance has heated up to this setting, the word
‘READY’ appears on the display.
,
The word ‘SONIC’ appears on the display (see section ‘Sonic
vibration’).
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
3 Select a temperature setting that is suitable for your hair.
- Always select a low setting when you use the straightener for the first
time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
- For fine, medium-textured or softly waved hair, select a medium to
low setting (160 and below).
Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
4 To set the temperature setting, press the + button to increase the
temperature setting or press the - button to decrease the
temperature setting. (Fig. 2)
,
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
‘READY’ appears on the display.
,
The bars on the display show the remaining usage time of the
appliance. The total usage time is 60 minutes. Every ten minutes one
of the six bars disappears. After 60 minutes, the appliance switches
off automatically.
5 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 3)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Note: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
EnglisH
9