APPENDIX B – Hi-Q DEFAULTS
35
I
TEM
F
ACTORY
D
EFAULT
V
ALUE
Alarm Setup
Auxiliary Alarms
All Disabled
Auxiliary Alarm Input Polarity
All Normally Open
Relay Output Polarity
All Normally Open
Relay Output Enable
Disabled
Relay Activation Dwell Time
5 seconds
Relay Activation FOLLOWS Mode for
Disabled
Contact Closure Alarms
1
-Touch Alarm
Enabled
Dark Alarms
All Disabled
Motion Detector Alarms
All Disabled
Pre-alarm Recording Duration
30 Seconds
Post-alarm Recording Duration
1
Minute for All Alarm Types
Recording Setup
Video Recording
All Continuous
Audio Recording
Disabled
Estimated Recording Time
Calculated
Image Quality
Highest Quality
Time-lapse mode
Real Time
Disk Full Behavior
Overwrite; (Stop Recording with disk array)
Hard Drive: Data Redundancy
For DVRRT4EP Model Only: Striping
Disk (
1
, 2) Status
Determined by System
Total Disk Capacity
Calculated
Archive Mode
Manual; (set to Stop Recording with disk array)
Motion Detector Setup
Target Size
2 h x 2 v
Motion Zones
All Grid Elements Active
Sensitivity
70
Suppression
Standard
Motion Detector Direction
All (
1
)
Target Speed
0– 40 seconds
Miscellaneous Setups
Profile Name
Profile [Profile Number]
Warning Beeper
Enabled
Front Panel Password Protection
Disabled
Language Selection
English
Date/Time On-screen Display Format
24-hour Mode; Not Affected by Restoring Factory Defaults
Activity Log Date/Time
Current Date / Current Time – 5 Minutes
IP Address
1
0.
1
0.0.0
Subnet Mask
255.255.255.0
Default Router
1
0.
1
0.0.
1
Name of Hi-Q
Hi-Qxxxx
Camera Titles
Camera n, where n is the camera number <
1
,2,3,4>
Brightness (Manual Gain) Adjustment on
AUTO
Video Inputs (MON A Only)
Sequence Dwell Time - MON A & B
3 Seconds
