7.4.1
Submenu <Alarms><<Inputs>>
NOTE:
Use
1-Touch Alarm
(front panel) to trigger alarm recording for the duration of the programmed POST
ALARM time. Continue alarm recording by pressing
1-Touch Alarm
again.
7.4.2
Submenu <Alarms><<Outputs>>
7.5
Motion Detection
Motion detection causes the system to alarm based on motion through a zone. Sensitivity, speed, and direction
settings can be set via these menus.
19
F
IELD
V
ALUES
D
EFAULT
V
ALUE
Auxiliary Alarm Input Polarity -
• Normally Open
Normally Open
Cameras 1– 4 individually
• Normally Closed
Auxiliary Alarm Recording
• Enabled
Disabled
Follows Contact
• Disabled
Pre-alarm Time
[1 to 60 seconds]
30 seconds
Post-alarm Time:
Video Motion
[1 to 60 minutes]
1 minute
Video Dark
Auxiliary
1
-Touch
F
IELD
V
ALUES
D
EFAULT
V
ALUE
Warning Beep
• Enabled
Enabled
• Disabled
Relay Output Polarity -
• Normally Open
Normally Open
Cameras 1– 4 individually
• Normally Closed
Relay Activation:
[3 to 60 seconds,
5 seconds
Dwell Time -
1 second increments]
Cameras 1– 4 individually
Follows Mode for Aux Alarm -
• Enabled
Disabled
• Disabled
