Philips HD8753/84 User Manual Download Page 54

Page: 54 / 72

ENGLISH

Press the “

” button to start the descaling cycle.

The machine will start dispensing the descaling solution at intervals.

The bar on the display shows the cycle progress.

When this icon is displayed, the water tank is empty.

Remove and empty the container and the milk carafe.

Empty the drip tray and place it back.

Note:

The descaling cycle may be paused by pressing the “

” button .To resume

the cycle, press the “

” button again. This allows you to empty the con-

tainer or to stay away from the machine for a brief period of time.

Red

CALC

CLEAN

. . . .

Red

Remove the water tank, rinse it and fi ll it up to the MAX level with fresh

water. Place it back into the machine.

Install the milk carafe into the machine. Place back the container under

both the milk carafe dispenser and the dispensing spout.

Summary of Contents for HD8753/84









































































Search results

Summary of Contents for HD8753/84

Reviews:

Related manuals for HD8753/84

Brands by name

Popular brands

Philips HD8753/84, User Manual

Search results

Summary of Contents for HD8753/84

Reviews:

Related manuals for HD8753/84

Brands by name

Popular brands