background image

64

ENGLISH

  

ENERGY SAVING

Stand-by

The Saeco full automatic espresso machine is designed for energy saving- 
proven by the Class A energy label.

After 30 minutes of inactivity, the machine turns off  automatically. If a 
product has been brewed, the machine performs a rinsing cycle.

In stand-by mode, the energy consumption is below 1Wh.
To turn on the machine, press “

” 

button (if power button on the back of 

the machine is set to “I”). If the boiler is cold the machine performs a rinsing 
cycle.

Disposal

Do not throw away the machine with the normal household waste at the 
end of its life, but hand it in at an offi

  cial collection point for recycling. By 

doing this, you help to preserve the environment.

 The packing materials can be recycled.

-   Machine: unplug the machine and cut the power cord
-   Deliver the appliance and power cord to a service center or public 

waste disposal facility.

This product complies with EU directive 2002/96/EC.
The symbol on the product or on its packaging indicates that this product 
may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the 
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent 
potential negative consequences for the environment and human health, 
which could otherwise be caused by inappropriate waste handling of this 
product. For more detailed information about recycling of this product, 
please contact your local city offi

  ce, your household waste disposal service 

or the shop where you purchased the product.

Black

Summary of Contents for HD8753/84









































































Reviews: