Philips HD8753/84 User Manual Download Page 55

Page: 55 / 72

ENGLISH

When this icon is displayed, the water tank is empty. Repeat steps 13 –

17. Then continue to step 19.

ello

When the amount of water needed for the rinse cycle has been com-

pletely dispensed, this icon on the side is displayed. Press the “

”

button to quit the descaling cycle.

The machine automatically primes the circuit.

The machine now carries out the warm-up and automatic rinse cycle to

prepare for product brewing.

When inserting the water tank into the machine, this icon is displayed.

Press the “

” button to start the rinsing cycle.

Red

CALC

CLEAN

. . . .

Red

When the water tank is empty, remove it from the machine. Rinse it

and fi ll it up to the MAX level with fresh water. Place the water tank
back into the machine.

Remove and empty the container.

Empty the drip tray and place it back.

The descaling cycle is now completed.

Summary of Contents for HD8753/84









































































Search results

Summary of Contents for HD8753/84

Reviews:

Related manuals for HD8753/84

Brands by name

Popular brands

Philips HD8753/84, User Manual

Search results

Summary of Contents for HD8753/84

Reviews:

Related manuals for HD8753/84

Brands by name

Popular brands