Philips HD TV, User Manual

Page: 28 / 61

EN 27
En
gli
sh
Install channels
Automatic install
When the TV was switched on for the first
time, a full installation of channels was
performed. You can redo this full installation
again to set your language, country and install
all available TV channels.
1. Press .
2. Select
[Setup]
>
[Search for channels]
,
then press OK .
3. Follow the on-screen instructions to
complete the channel installation.
4. Once complete, select
[Finish]
, then press
OK .
Tip: Press to see the channel list.
Notes
•
During installation, leave
[Settings]
unchanged unless your digital provider
provides you with the specific values to
enter.
• When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can
rename, reorder or uninstall these
channels.
Install analog channels
This section describes how to search and
store analog TV channels manually.
Step 1: Select your system
Note:
Skip this step if your system settings
are correct.
1. While watching TV, press .
2. Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue: Manual
installation]
>
[System]
, then press
OK
.
3. Select the system for your city, region or
country, then press OK .
Step 2: Search and store new TV channels
1. In the
[Analogue: Manual installation]
menu, select
[Find channel]
, then press
OK
.
2. Press:
• The
Navigation buttons
or
Numeric
buttons
to manually enter the channel
frequency.
•
The
Navigation buttons
to select
[Search]
. Press
OK
to automatically
search for the next channel.
3. When the correct channel frequency is
entered, select [Done] , then press OK .
4. Select
[Store current channel]
to store
the fine tuned channel using the current
channel number, or select
[Store as new
channel]
to store it as a new channel
number.
Fine tune analog channels
NonPu blish
If the reception of an analog TV channel is
poor, try fine tuning the TV channel.
1. Press .
2. Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue: Manual
installation]
>
[Fine tune]
, and then press
OK
.
3. Press or to fine tune the channel.
4. When the correct channel frequency is
selected, select
[Done]
, and then press
OK
.
5. Select
[Store current channel]
to store
the fine tuned channel under the current
channel, or select
[Store as new channel]
to
store under a new channel number.
Install digital channels
If you can receive digital TV broadcasts
(DVB), you can manually install digital
channels.
1. Press .
2. Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Digital: Reception
test]
>
[Search]
, then press
OK
.
3. Press the
Navigation buttons
or
Numeric
buttons
to manually enter the channel
frequency, then press
OK
.
4. When complete, select
[Store]
and press
OK
.
5. Press (
Back
) to exit the menu.