6.0 FACTORY SERVICE MODE TESTING
<HDD084 FM RECORDING >
< F106.50 S3 >
<STEREO
>
< REC ON >
•
The battery level will be refreshed regularly every 1 second.
MIC Recording Test
Steps
•
Connect a microphone.
•
Scroll to “MIC Recording Test” using UP / Down Key
•
Press RIGHT to enter the test.
•
Press REC key to start the recording .The recorded file will be
“MICREC.MP3”.
•
The recoded file can be verified in “AUDIO TEST CASE” (4.1.9)
•
Press LEFT to exit the test
FM Recording Test
Steps
•
This test will be done during the tuner test and is not a separate test
case .
•
Initialise the Tuner.
•
Search the desired station using UP/DOWN Key.
•
Press REC key to start the recording .The recorded file will be
“FMREC.MP3”.
•
The recoded file can be verified in “AUDIO TEST CASE” (4.1.9)
•
Press LEFT to exit the test.
Real Time Clock Test
Steps
•
Scroll to “Real Time Clock Test” using UP / Down Key
•
Press RIGHT to enter the test. “
•
If the test is successful “RTC TEST OK” is shown on LCD, if the Test
fails “RTC TEST FAIL” is shown on the LCD.
•
Press LEFT to exit the test.
.
Verification of RTC
•
When user selected the RTC test, Software will write a pre-defined
register value to the RTC.
•
After 1 second, Software will read back the RTC register value
and check if the RTC date is correct and clock is incremented by 1
second.
•
If the test is successful, “RTC TEST OK” is shown on the LCD
display, if test fails “RTC FAIL” is shown on the LCD display.
.
<HDD084 MIC RECORDING >
< >
<REC ON
>
< >