18
English
Basic Opeations
Volume control
Turn the
VOLUME
control on the set or
VOL
+/-
on the remote to increase or decrease the
volume level.
➜
”
VOL XX
” is displayed on the display panel.
“
XX
” denotes the volume level.
To switch off the volume temporarily
●
Press
MUTE
on the remote.
➜
Playback will continue without sound and
“
MUTE
” appears.
●
To activate sound reproduction, you can:
– press
MUTE
again;
– adjust the volume controls;
– change source.
Karaoke
Connecting a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1
Connect microphone(s) to the
KARAOKE
jack
or/and the
MIC IN
jack.
●
Before connecting the microphone, set the
microphone
MIC LEVEL +/-
to the minimum
level to prevent howling sound.
2
Press
SOURCE
repeatedly on the set or
DISC
on the remote control to select the source to be
mixed and start playback.
3
Adjust the volume level of the source with the
master
VOLUME
control.
4
Adjust the microphone volume with the
microphone
MIC LEVEL +/-
control.
5
To set the echo level, press
SYSTEM MENU
on the remote, and then select
AUDIO
SETUP
>
ECHO
.
Note:
– Keep the microphone away from the speakers to
prevent howling.
– The ECHO can be set only when MIC SETUP is
set to AUTO.
Basic function
Switching the system on
●
Press
STANDBY-ON
B
.
➜
The system will switch to the last selected
source.
●
Press
DISC
,
USB/MP3 LINK, TUNER
or
TAPE/AUX
on the remote).
Switching the system to Standby
mode
●
Press
STANDBY-ON
B
in the active mode.
➜
The system enters standby mode with clock
display.
●
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Sound Control
DBB and DSC sound features cannot be
activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press
DBB
on the remote twice to enable/
disable DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press
DSC
on the remote repeatedly to select:
OPTIMAL, JAZZ, ROCK, or TECHNO.
pg001-pg018_FWD18_98-Eng
2008.5.20, 17:13
18
