16
EN
Step 1: calibrate the listening
zone
This step is to optimize surround experience
through balance of your seating position.
1
Place the wireless surround speakers on
two seating positions you prefer most
(such as on a sofa).
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press
SOD
on the
wireless speaker).
2
Press and hold
on the
remote control for three seconds to
trigger calibration.
»
(zone) is displayed on the
display panel.
»
You can hear the calibration tones
from the wireless surround speakers.
3
Wait until the calibration tones end.
»
->SPEAKER
(speaker) is displayed on
the display panel.
4
Then perform the following Step 2
(calibrate the surround speaker position)
to complete and store the new settings.
Step 2: calibrate the surround
speaker position
This step is to optimize surround experience
through balance of the placement of wireless
surround speakers.
1
Place the wireless surround speakers on
the position you prefer.
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press
SOD
on the
wireless speaker).
2
Press
CALIBRATION
once to trigger
calibration.
• Press
CALIBRATIONthree times
to
trigger calibration if you re-locate the
wireless surround speakers and skip
Step 1 (calibrate the listening zone)
after you completed a round of spatial
calibration previously.
»
You can hear the calibration tones
from the wireless surround speakers.
3
Wait until the calibration tones end.
»
If the calibration succeeds,
DONE
(done) is displayed on the display
panel. And the new settings are stored.
