23
EN
Change the internal Wi-Fi settings of
this system
^ " !
you can change the internal Wi-Fi settings for
connection of this system to your existing home
Wi-Fi network.
Note
(
q "
page match your home Wi-Fi network settings that you
wrote down on paper.
(
Follow the on-screen instructions to
|}~
settings.
»
,
middle of
WIFI SETUP
button stops
" !
main unit beeps.
»
This system is connected to your
existing home Wi-Fi network
successfully.
Note
(
If the LED indicator in the middle of
WIFI SETUP
" !
Wi-Fi connection has failed. Reboot your Wi-Fi router
! !
is connected to your Wi-Fi network. If the problem
! "% &
(
, ! "% "
! |}~ "! !
disappears.
Tip
(
H ! ! %
system in
Advanced settings
(Advanced settings) -
>
AirPlay Device Name
(AirPlay Device Name) on
" & !
distinguish this system from other Philips AirPlay-
enabled devices in your house.
(
If you want to enter the network name (SSID)
! X = ! ! HZ
go to
Advanced settings
(Advanced settings)
->
CONFIGURE MANUALLY
X@ !Z
" !&
(
|}~ }
hold
WIFI SETUP
for more than 3 seconds to reset the
Wi-Fi setting. Then follow the previous steps to change
your network settings.
