Philips Faro 770 Series Extended User Documentation Download Page 7

Page: 7 / 51

• Scroll up on the menu.
• Increase the earpiece/speaker

volume.

• Access the phonebook in

standby mode.

• Press to delete individual text

or digit. Press and hold to
remove all text.

• Cancel operation.
• Access the redial list in standby

mode.

• Change the sound profile

during a call.

• Select the function displayed

on the handset screen directly
above the key.

Move the cursor to the right in
editing mode.

•  End the call.
•  Exit the menu/operation.
•  Press and hold to power on/off

the handset.

• Scroll down on the menu.
• Decrease the earpiece/speaker

volume.

• Access the call log in standby

mode.

• Press to enter a space during

text editing.

• Press and hold to lock/unlock

the keypad in standby mode.

• Press and hold to enter a pause

when when making a call.

• Switch to upper/lower case

during editing.

(for M770) or / (for M775)

• Mute or unmute the

microphone.

• Access to the answer machine

menu in standby mode (for
M775 only).

• Listen to new messages from

the answering machine (for
M775 only).

Microphone

• Turn the speaker phone on/off.
• Make and receive calls through

the speaker.

• Press and hold to make an

intercom call (for multi-handset
version only).

• Set the dial mode (pulse mode

or temporary tone mode).

• Make and receive calls.
• Recall key (This function is

network dependent.)

Move the cursor to the left in
editing mode.

• Access the main menu in

standby mode.

• press and hold to access the

main menu when there is a new
missed call/new message/new
voice mail.

• Confirm selection.
• Enter the options menu

• Access the main menu in

standby mode.

• Press and hold to access the

main menu when there is a new

Summary of Contents for Faro 770 Series




















































Search results

Summary of Contents for Faro 770 Series

Reviews:

Related manuals for Faro 770 Series

Brands by name

Popular brands

Philips Faro 770 Series, Extended User Documentation

Search results

Summary of Contents for Faro 770 Series

Reviews:

Related manuals for Faro 770 Series

Brands by name

Popular brands