Philips Faro 770 Series Extended User Documentation Download Page 8

Page: 8 / 51

missed call/new message/new
voice mail.

•  Confirm selection.
•  Enter the options menu
•  Select the function displayed

on the handset screen directly
above the key.

Battery sleeve

Overview of the base

station

2
3
4

• Turn the speaker on/off (when

the pre-registered handset is
on the base station).

• Make and receive calls through

the speaker (when the handset
is on the base station).

Press to snooze the alarm (when
the pre-registered handset is on
the base station).

LED indicator

•  Off: no new event.
•  On: in a call.
•  Flashing: new missed

calls/new messages on
answering machine/new voice
mails.

LCD display

• The caller's name and number

are displayed alternately when
there is an incoming call (This
feature is available only if you
have registered to the caller
ID service with your service
provider).

• The time is displayed in

standby mode.

• Press to find handsets.
• Press and hold to enter the

registration mode.

Summary of Contents for Faro 770 Series




















































Search results

Summary of Contents for Faro 770 Series

Reviews:

Related manuals for Faro 770 Series

Brands by name

Popular brands

Philips Faro 770 Series, Extended User Documentation

Search results

Summary of Contents for Faro 770 Series

Reviews:

Related manuals for Faro 770 Series

Brands by name

Popular brands