4
To stop dispensing hot water, press the OK button.
Brewing milk-based coffee beverages and milk froth
Note: For more information on how to use the milk carafe, read the separate
quick start guide or scan the QR code (see ' ') to access the dedicated
website for instruction videos (www.philips.com/coffee-care).
Caution: Make sure that the milk carafe is installed and the milk froth
dispensing spout is open before you select a milk-based coffee beverage or
milk froth. If the milk carafe is not installed correctly, steam and hot milk may
spray out of the milk froth dispensing spout.
Note: Make sure that the CoffeeSwitch is in the correct positon for the
beverage you choose.
1
Place a cup under the open milk froth dispensing spout.
2
Choose your milk-based beverage.
-
Press the one-touch CAPPUCCINO button, LATTE MACCHIATO
button (EP4050 only) or CAFÉ AU LAIT button (EP4051 only) to brew
one of these milk-based beverages right away.
-
Press the MENU button, choose DRINKS and scroll down through the
drinks to select MILK FROTH, LATTE MACCHIATO (EP4050 only) or
CAFÉ AU LAIT (EP4051 only).
-
The machine reminds you that you have to install the milk carafe and
open the milk froth dispensing spout.
3
If you make cappuccino or latte macchiato, the machine first dispenses a
preset volume of frothed milk into the cup or glass and then dispenses a
preset volume of coffee. If you make café au lait, the machine first
dispenses a preset amount of coffee and then a preset amount of
frothed milk.
-
To stop dispensing milk or coffee, press the OK button.
4
After brewing milk-based coffee beverages, the display asks you if you
want to perform the quick clean procedure for the milk carafe. You have
30 seconds to activate the quick clean procedure (see 'Carafe quick
clean').
Adjusting volume and taste
Adjusting coffee and milk volume
You can adjust the volume of the beverage brewed according to your taste
and to the size of the cups.
Note: We advise you to use glass cups or cups with a ceramic-coated rim.
1
To adjust the espresso volume, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to brew the
selected beverage.
12
English
