Philips EasyCare GC8300 Series, User Manual

Page: 10 / 190

3 + *
!"
Steam ironing is only possible at ironing temperatures higher than
2
.
4 Set the required steam setting with the + and - buttons on the steam
generator control panel.
p
for maximum steam (temperature setting MAX).
[
for moderate steam (temperature settings
3
to MAX).
ECO for minimum steam (temperature settings
2
to MAX).
a
for no steam (temperature settings
1
to MAX).
,
$%
heating up.
,
& '(
indicate that the steam generator is ready for steam ironing.
Note: During ironing, you can adjust the steam setting with the + and - steam
"#" $
5 Press the steam trigger to start steam ironing.
When you put down the iron during ironing, put it on its heel or on the
iron stand.
,
The opening and closing of the steam valve in the steam generator
causes a clicking sound. This is normal.
Steam lock function
The steam lock allows you to steam iron non-stop without having to press
the steam activator continuously.
- When you slide the steam lock forwards, the iron produces steam
continuously. To stop steaming, slide the steam lock backwards.
- When the steam lock is deactivated, the iron only produces steam
when you press the steam trigger.
Note: Release the steam lock when you put the iron on its heel or on the iron
Vertical steaming
Never direct the steam at people.
1 Hold the iron in vertical position and press the steam trigger to
;"
Shot of steam
A powerful shot of steam helps to remove stubborn creases.
1 Set the temperature dial to a position between
3
and MAX.
2 Press the shot-of-steam button.
% &&#
of the soleplate, let the iron heat up for at least one minute before you use the
&&
ENGLISH
10