23
5.11 Restoring Factory Defaults
Advanced Menu
➝
Factory Settings
Use this menu to restore the DVR1 to the factory defaults.
NOTE:
When the factory settings are restored, all programmed
settings and volume partitions for archive retrieval are erased.
The factory password is fixed at
0000
. Therefore, you can
repeatedly press
ENTER
, and press
ENTER
to complete entry
and restore the unit to its factory default settings.
5.12 Changing the Password
Advanced Menu
➝
Change Password
Use this menu to change the
Advanced Menu Password
. It is
recommended that the System Administrator change this
password to prevent unauthorized access to the menu.
Use the
Up/Down Arrows
to select a character, then press
ENTER
and move to the next character.
Pressing
ENTER
on the last character opens the
Confirmation Box
.
Reenter the New password.
Pressing
ENTER
on the last character completes the password
selection.
If the password in the
Confirmation Box
matches
the
password from the
Password Box
, the message at right will
appear.
Press
ENTER
to select
[OK]
and exit the menu.
If the password in the
Confirmation Box
does
not
match the
password from the
Password Box
, the message at right will
appear.
Press
ENTER
to select
[OK]
and exit the menu.
PASSWORD BOX
ENTER A NEW PASSWORD
O
– – –
CONFIRMATION BOX
PLEASE RE-ENTER THE PASSWORD
O
– – –
MESSAGE
THE NEW PASSWORD HAS BEEN ACCEPTED
[OK]
MESSAGE
THE PASSWORD WAS NOT CHANGED!
[OK]
PASSWORD BOX
PLEASE ENTER THE FACTORY PASSWORD
O
– – –
