8
Note
If you are not going to use the remote control for a long
•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Select menu display language
Note
If this product is connected to a HDMI CEC compliant
•
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Select
[OSD Language]
, and then press .
3
Press
to select a language, and then
press
OK
.
Connect USB fl ash drive
1
Connect a USB fl ash drive to the
jack on
this product.
Note
This product can only play/view MP3, WMA, DivX
•
(Ultra) or JPEG fi les that are stored on a USB fl ash drive.
Press the
•
button to access the content and play
the fi les.
Connect power
Caution
Risk of product damage! Ensure that the power supply
•
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.
•
1
Connect the AC power cable to the wall
socket.
The product is ready to be set up for use.
»
4 Get
started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see “1” in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see “3” in the illustration).
DVD PLAYER DVP3568
EN
