E
n
g
li
sh
5
Setup Menu Options
(continued)
Audio Setup Page
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output jack.
{
LT/RT
}
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
{
Stereo
}
– The connected device can only output
stereo audio through two speakers.
{ V SURR }
– For virtual surround sound effects.
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{
Digital Output
} – {
SPDIF
Off
}
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{
All
}
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{
PCM Only
}
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(-channel).
{
LPCM Output
} – {
48 K
}
Select this to play disc recorded at
sampling rate of 8 kHz.
{
96 K
}
Enable 96 kHz output on digital audio if
the amplifier/receiver is compatible
with high sampling rate audio (88. / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to ‘8 K’.
Note:
LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
Analog Output
Digital Audio Setup
1dvp3260K_98_eng1.indd 35
2008-04-18 9:39:25 AM
