English
34
PLAYBACK
Playing a DVD+RW or DVD+R
disc
l
Insert a DVD+RW or DVD+R disc.
‰
If the inserted disc is write-protected, playback
starts automatically otherwise the Index Picture
Screen appears.
l
Press
2
PLAY.
‰
Playback starts automatically from the point
where it was stopped the last time the disc was
played or recorded. If you want to start playback
from the beginning of the disc, you can do so via the
Index Picture Screen (see ‘Index Picture Screen’).
‰
If the disc is a new blank disc, the display will
show ‘
EMPTY DISC
’.
l
To stop playback at any time, press
9
STOP.
‰
You return to the Index Picture Screen.
Playing a pre-recorded DVD-
Video disc
Some DVD discs are produced in a way that requires
specific operation or allows only limited operation
during playback. In these cases the recorder may not
respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay. When a
appears on the TV screen, the operation is not
permitted by the recorder or the disc.
l
Insert a pre-recorded DVD-Video disc. Make sure
the label is facing up. If the disc is two-sided, make
sure the label of the side you want to play is facing
up.
‰
When ‘
autoresume
’ is set to ‘
On
’ (see ‘User
Preferences’) playback starts automatically from the
point where it was stopped, the last time the disc
was played.
‰
When ‘
autoresume
’ is set to ‘
Off
’, the disc will
play from the start of the disc. You can however
resume play from the point at which you stopped,
the last time the disc was played, by pressing
2
PLAY
when
appears on screen.
‰
The currently playing title and chapter number
are displayed on the recorder display. The elapsed
time is shown also.
Notes:
- DVD movies to be released at different times in different
regions of the world, all players have region codes and discs
can have an optional region code. If you load a disc of a
different region code to your recorder, you will see the region
code notice on the screen. The disc will not play, and should
be unloaded.
-
The region code is stated on a label on the
back side of your recorder.
- Regional coding is not applicable for
recordable DVD discs.
l
The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical key; if not, use the
w v u t
(down up right left cursor) keys to highlight your
selection, and press
OK
.
l
To stop play at any time, press
9
STOP
.
‰
The default screen will appear, giving information
about the current status of the recorder.
Note:
During playback you can display and enter the menu by
pressing
DISC MENU
.
Playing a (Super) Video CD disc
l
Insert a (Super) Video CD.
‰
When ‘
autoresume
’ is set to ‘
On
’ (see ‘User
Preferences’) playback starts automatically from the
point where it was stopped, the last time the disc
was played.
‰
The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical key
0-9
.
l
To stop play at any time, press
9
STOP
.
‰
The default screen will appear.
Playback
07DVDR990UKD4 06-06-2002 15:00 Pagina 34
