English
18
Step 1: Basic Recorder Connections
(continued)
Option 4: Using Component
video socket / Connecting to a
Progressive Scan TV
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
A
Connect the component video cables
(red/ blue/green - not supplied) from the
Y P
B
P
R
sockets on the recorder to the
corresponding component video input
sockets (usually labelled as Y Pb/Cb Pr/Cr
or YUV) on the TV.
B
Connect the audio cable (red/white - not
supplied) from the
AUDIO OUT L/R
sockets on the recorder to the audio
input sockets on the TV.
Note:
To enable Y Pb Pr (YUV) connection, you
must set the recorder’s video output
correctly.
A
Make an addition video connection from
this recorder to your TV using Scart,
S-Video or Video (CVBS).
B
Turn on your TV to the correct viewing
channel for the above video connection.
C
When you have completed the
installation and set-up, change the video
output setting of this recorder as
follows:.
1) Press
OPTIONS
.
2) Move to {
Settings
} > {
Video
output
} > {
Active video output
}
> {
Comp. video (YUV)
}, then
press
OK
to confi rm.
To activate Progressive Scan output, see
‘Other information - Setting up
Progressive Scan feature’ for details.
D
Switch your TV to the correct viewing
channel for the Component video
connection (refer to your TVs user
manual).
COAXIAL
DIGITAL OUT
CVBS OUT
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
AUDIO
ANTENNA-IN
TV-OUT
TO TV
EXT
1
TO VCR/SAT
EXT
2
PB
PR
Y
R
L
TV
Option 4
Summary of Contents for DVDR3570H
Page 107: ...107 ...
