English
21
Getting Started
Step 1 : Inserting Batteries
1
3
2
A
Open the battery compartment.
B
Insert two batteries type R06 or AA,
following the indications (
+-
) inside
the compartment.
C
Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the remote control to
operate the system
A
Aim the remote control directly at the
remote sensor (IR) on the front panel.
B
Press the
REC SOURCE
button on the
remote control to select the mode you
wish to control (for example TUNER,
Front-CVBS).
C
Then select the desired function (for
example
,
).
Step 2 : Finding the viewing
channel
A
Press
STANDBY-ON
2
on the DVD
recorder to turn it on.
B
Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV’s manual for more details.
Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
Or, the TV remote control may have
a button or switch that chooses different
video modes.
IMPORTANT!
When you complete the
connections and turn on the DVD
recorder for the fi rst time, it is
advisable that you make several
basic settings.
Please see the following pages on
using the System Menu features
to program TV channels and
menu language settings. This will
improve the performance of this
DVD recorder considerably.
dvdr3365_75_eng_16752.indd 21
dvdr3365_75_eng_16752.indd 21
2005-11-02 2:21:37 PM
2005-11-02 2:21:37 PM
