Note: If you have put your receiver in “standby” or “low power” mode and the red, right-hand LED is blinking, it
indicates that a free over-the-air upgrade of your receiver is taking place. Do not interrupt this operation. Wait
until the LED stops blinking and the left-hand LED is either orange or red (signalling either “standby” or “low
power” mode).You can then continue as normal.
3.1
Front view
English
PRODUCT DESCRIPTION
9
3
Product description
1
LOW POWER button:
. . . . . . . . . .
Switch receiver ON or to “low power” mode.
Reset the receiver after a 5 second key press.
2
TV/RADIO button
. . . . . . . . . . . . . . .
Toggle between TV and Radio mode.
3
“-” button
. . . . . . . . . . . . . . . . . . . . . . . .
Channel down.
4
Multicolour LED indicator
. . . . . .
Display receiver status (see status indicator table).
5
Red LED indicator
. . . . . . . . . . . . . . .
Display receiver status (see status indicator table).
Blink at remote control command reception.
6
“+” button
. . . . . . . . . . . . . . . . . . . . . . . .
Channel up.
7
Smart Card slot
. . . . . . . . . . . . . . . . . .
Insert the smart card with the chip facing up.
Status indicator table
LED
Right-hand LED
Left-hand LED
Mode
(Green/Orange)
(Red)
Receiver off mains
Low power mode
Red
Standby mode
Orange
TV/Radio mode
Green
Timer mode from running mode
Green
Red
Timer mode from standby mode
Orange
Red
Q
W
E
R
T
Y
U
Doc.DTR2000 version N/B 19/12/03 9:01 Page 9
