7.2.2.5 VCR recording control
This feature is used to select the control method that best
suits your VCR:
o NO
o PREPARE RECORD
o RECORD LINK
For more details, see chapter 10.
Note: This setting is also applicable for Philips DVD recorders or
other brand equipment that support one the two control systems.
7.2.3
Time Setting
This screen is used to set the local time offset with respect
to actual local time obtained from the network.
- Scroll up or down to select the appropriate offset value
(from -12 to +12).
- Press "OK" to store the selected value and go back to the
previous screen or BACK" to cancel and go back to the
previous screen.
7.2.4
Remote Control Setting
If you have other equipment in your home and the remote
control of the Philips receiver causes interferences, you can
change the setting of the remote control using this feature.
To change the remote control setting:
- Press number buttons 1 and 3 simultaneously for
3 seconds.
- Release the two buttons simultaneously.
- Enter the new setting:
o Either press number button 4 (corresponding to the
new setting);
o Or press number button 3 to come back to the default
setting.
Notes:You have 120 seconds to perform changes. At the end of
this time period, the "Remote control change" screen is displayed,
indicating whether you changed the remote control setting or not.
At first power up of the remote control (or battery change while
pressing a button) the default setting (value 3) is restored.
24
CHANGING THE SETTINGS OF YOUR RECEIVER
English
Doc.DTR2000 version N/B 19/12/03 9:01 Page 24
