9
English
EN
4 Connect
to
your home Wi-
Fi network for
AirPlay
To connect DS3880W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi setting to DS3880W.
You can do this in two ways (depending on
which type of Wi-Fi router you use):
Automatically - if your Wi-Fi router is
WPS (Wi-Fi Protected Setup)-enabled
and supports PBC (Push Button
Connection) (see 'Scenario 1: Connect
to a WPS router' on page 9)
Manually - if your Wi-Fi router does
not support WPS (see 'Scenario 2:
Connect to a non-WPS router' on
page 10)
Once connected successfully, DS3880W will
remember your home Wi-Fi settings. Then
you can enjoy AirPlay whenever DS3880W is
powered on and connected to your home Wi-
Fi network automatically.
Before connection of DS3880W to you home
Wi-Fi network, check the points below.
1
Make sure that your Wi-Fi router is
powered on and working properly.
2
Make sure that DS3880W has been
powered on and booted up successfully
(see 'Turn DS3880W on' on page 8).
3
Identify the type of your Wi-Fi router (see
the user manual of your Wi-Fi router for
details).
Scenario 1: Connect to a
WPS router
Note
Before you press any button on DS3880W, make sure
that DS3880W has been booted up successfully (see
'Turn DS3880W on' on page 8).
1
Press the WPS button on your home Wi-Fi
router.
2
Shortly after step 1, press
Wi-Fi SETUP
on
the back of DS3880W.
»
The
Wi-Fi SETUP
indicator blinks red,
yellow and green alternately.
»
Within 2 minutes, the
WI-FI SETUP
indicator stops blinking and stays green,
and the unit beeps.
WPS
