Philips DPTV400 Series, Training Manual

Page: 5 / 78

Set Operation Highlights
Figure 1 shows an outline of the Customer menus. Listed below are some of the differences from
previous Philips Projection sets.
In the Picture menu selection, there are the normal controls, Brightness, etc. The COLOR TEMP
selection shifts the color balance of the picture when selected by the Customer. The Warm setting
shifts the white balance to the Red. The Cool setting shifts the white balance of the picture to the
Blue. In the Normal setting, the color temperature of the picture shows the picture with the correct
colors. When a gray scale or black and white picture is shown, there will be no color tint in the pic-
ture.
The INTELLITUNE selection under Features will auto-program the channels to add any new chan-
nels that may be detected while the set is turned Off. This feature can be switched On or Off by the
Customer. It will not delete any existing channels. The Channel Edit selection under Install is used
to manually install the NTSC channels that are not detected by the AUTOPROGRAM. The WEAK
DIG SIG selection is used to add any digital channels that were not detected by the AUTOPRO-
GRAM selection. To delete all of the channels, use the FACT CH RESET selection (channels are
not deleted when the AUTOPROGRAM selection is made).
In the ATSC system, Emergency alerts can be transmitted as low level or high level. The EMERG
ALERT selection in the menu allows the Customer to turn the low level or high level alert feature On
or Off.
FIGURE 1 - CUSTOMER MENUS
Page 2