50
English
The DVD system does not
start playback.
The aspect ratio of the screen
cannot be changed even though
you have set the TV display.
Cannot activate some features
such as Angles, Subtitles, or
multi-language Audio.
Not able to select some items
in the setup/system menu.
Unable to play DivX movies.
Radio reception is poor.
The DVD system does not
work.
The disc in the disc slot cannot
be ejected.
– Insert a readable disc with the playback side facing
down. The DVD+R/CD-R must be fi nalized.
– Check the disc type, color system (PAL or NTSC)
and region code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the system setup menu
screen.
– You may need to enter the password in order to
change the parental control rating level or to unlock
the disc for playback.
– Moisture may have condensed inside the system.
Remove the disc and leave the system turned on for
about an hour.
– The aspect ratio is fi xed on the DVD disc.
– Depending on the TV, it may not be possible to
change the aspect ratio.
– The features may not be available on the DVD.
– Changing the language for the sound or subtitle is
prohibited on this DVD.
– Press STOP button twice before selecting the system
setup menu.
– Depending on the disc availability, some menu items
cannot be selected.
– Check that the DivX fi le is encoded in ‘Home
Theater’ mode with DivX certifi ed encoder.
– If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the system and your
TV or VCR.
– Tune in to the correct frequency.
– Place the antenna further away from any equipment
that may be causing the interference.
– Disconnect the power cord from the power outlet
for a few minutes. Reconnect the power cord and try
to operate again as usual.
– Press and hold the STOP button on the remote
control followed by pressing the digit keys ‘2’, ‘5’ and
‘9.’
Problem
(Playback)
Solution
Troubleshooting
(continued)
