Philips DDL172LKCC0/97, User Manual

Page: 6 / 14

8 9
Insert the compressed spring and
square shaft accordingly to the
outside escutcheon, then insert
the rotary knob tailpiece. Insert
the outside escutcheon connecting
cable and motor cable into the
corresponding holes on the inside
escutcheon, then align the rotary
knob tailpiece on the inside
escutcheon with the square shaft
and insert it to make sure the inside
escutcheon is kept close to the
inside of the door.
Tighten the 2 anchor screws.
Install the batteries, then the
battery cover and the inside
lower cover.
Try the inside and outside
handles, the rotary knob, the
mechanical key and check if all
components are well connected.
7 8
9
10
Keypad
Card reader
Mute button
Low battery indicator
Fingerprint sensor
Lever
Door status indicator
Reset button
Emergency power interface
Mechanical key hole
Battery cabinet
Lever
Safe handle switch
Reset button
Extension module
Rotary knob
3 Get to know your EasyKey
Outside escutcheon
Inside escutcheon
1
1
2
2
3
3
4
4
5
5
6
6
7
8
9
10
Please hide the extra
connecting cable into
the hole of the door.
Attention