16
2
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Note
Before you press any function button on the
"$ "
with the remote control instead of the main
unit.
If you are not going to use the remote control
for a long time, remove the battery.
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
1
Press and hold for over 3 seconds to
switch the unit to Eco Power Standby
mode.
»
The backlight on the display panel
turns off.
»
The blue Eco Power indicator turns on.
To switch the unit to standby mode:
1
In Eco Power Standby mode, press and
hold for over 3 seconds.
»
The clock (if set) appears on the
display panel.
»
The blue Eco Power indicator turns off.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press
SOURCE
repeatedly until
[TUNER]
is displayed.
»
[AUTO INSTALL PRESS----PLAY
KEY]
(press
to start the automatic
installation) is displayed.
4 Get
started
Caution
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. _________________________
Serial No. __________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
$%<
%
!"
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
Open the battery compartment.
EN
